Netsurf 6500Watts/6.5KW Hybrid Inverter 48V 110/220 Split Phase

https://netsurfpower.com/wp-content/uploads/2024/07/WhatsApp-Video-2025-10-20-at-09.26.42.mp4   Efficient Dual MPPT with up to 99.9% efficiency Up to 22A PV input current perfect for high power modules All in One Solar Charger Controller up to 200A charging current Support for Li-ion battery BMS communication Reliable Outputs high quality pure sine wave AC power 6.5kW load power to meet the needs of most households Off-grid Inverter two Working Modes This hybrid PV inverter can provide power to connected loads by utilizing PV power,utility power and battery power. Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), battery, and the utility. When MPP input voltage of PV modules is within acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge battery. This inverter is only compatible with PV module types of single crystalline and poly crystalline. Do not connect any PV array types other than these two types of PV modules to the inverter. Do not connect the positive or negative terminal of the solar panel to the ground. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter. Pure off-grid working mode: working as traditional off-grid inverters, can set the output to utility first, battery first, or solar first. Hybrid working mode: working as a hybrid, support solar and utility jointly take the load, can set to the self-consumption mode or charge priority mode. Compatibility: This hybrid inverter is suitable for 48v or 51.2v lithium batteries and flooded and sealed GEL/AGM lead-acid battery banks with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.